|Place of Origin:||Guangdong (China)|
|Minimum Order Quantity:||1000 PCS|
|Delivery Time:||7-15 days( depend on quantity for zipper)|
|Supply Ability:||50000 Piece/Pieces per Day|
Long Chain 5# Open-End Resin Waterproof Zipper , C / E Auto Lock Slider Orange
5# Waterproof Zipper C/E Auto Lock slider
Used for garments pockets
Made of a new kind Polymer material
Good contractility, can be flexible well from -30° ~120°
With excellent waterproof effection
Also with good oxidation resistance
We can supply you different types and sizes, length.
Main function: Splash water
Type: Long chain
Main colour: Black gradient
(1). Nylon TPU Waterproof Zipper Chain
(2). Printing Waterproof Zipper Chain
(3). Processing Films Lamination on Zipper.
(4). Exclusive Seamless Decorative Materials (Decorative Films /Hot Melt Adhesive Films)
The technical info
The utility model discloses a novel nylon air-tight and waterproof zipper which comprises a zipper belt and zipper teeth, wherein, the nylon zipper teeth are arranged on a high-strength terylene mesh belt, a layer of TPU (thermoplastic polyurethane) is arranged on the zipper belt and the zipper teeth which are arranged at the front face of the zipper, the TPU layer is leaked into the gap of the zipper belt to form a mixing layer with the zipper belt, and the half side of each zipper tooth is safely coated and protected by the TPU (thermoplastic polyurethane). When the zipper teeth are closed, the peripheral TPU (thermoplastic polyurethane) of the zipper teeth is tightly combined together, the gap of the zipper can be well sealed with upper zipper teeth and lower zipper teeth, the thickness of the TPU layer of the zipper tooth is larger than that of the TPU layer of the zipper belt, and a convex edge is formed by adapting the TPU to coat and by the integral design. The utility model has the advantages of durability, low cost, water and air resistance, ultraviolet ray resistance, corrosion prevention, ageing and abrasion resistance, and the like.
The DaSun Zipper will hold 200 mbar air pressure. The DaSun Zipper is less air-tight than the
DaSun Zipper but is easier to open or close. Heavy bending may cause leakage. Please try to avoid!
The DaSun Zipper is highly resistant to damage caused by dirt or sand. However if dirt or sand are present, the zipper should be cleaned with soap and water. Dirt particles can affect the sealing function if they get caught between the teeth chains. If the DaSun Zipper closure is used to protect life or sensitive material, the sealing function and cleanness of the chain area should be double checked prior to every usage.
For the sealing function the DaSun Zipper requires a fairly strong pull of the slider. Please allow a slightly higher pulling force as compared to regular zippers. A wet surface or lubricant on the outer flanges of the sealing profile reduces the pulling force greatly.
Oil and petrol
Hydrolysis (normal temperatures)
Hydrolysis (extreme temperatures and humidity)
-30°C - +80°C
Light acids and alkalis (normal temperature)
8 (8TZN CR airtight zipper)
Teeth material: cupronickel
Tape material: Chloroprene rubber (CR)
zipper length: 5-100CM (according to customers' requirements)
dual sealed or single sealed Zipper specifications: Width of zipper: 7.0 MM
Total width of zipper: 70.0 MM
Pulling intension of zipper: ≥250 N/IN
Strength of the top stop: ≥350 N
Strength of the bottom stop: ≥350 N
Airtight: ≥100 KPA Dive depth: ≥10 M
Airtight after 200 times reciprocation: ≥90 KPA
Dive depth after 200
times reciprprocation: ≥9M
Chain smooth: <55 N
Smooth of top and bottom stop: <75 N
Work temperature: -30℃-65℃
Chemistry resist Work safely after 24 hours deep in 93# gas